(302) 213-6772
Texas contractors · general liability

How much is contractor insurance in Texas? What contractors pay with Soma.

A typical Texas contractor pays about $1,200 a year for general liability with Soma, based on policies we placed in the last 12 months. Your trade and revenue move it most.

Texas contractor insurance cost by trade

What Texas contractors paid with Soma for general liability, per year.

TradeMedian
Roofingabout $1,900$1,600–$2,600
General contractors & remodelersabout $1,200$700–$1,900
Plumbing & HVACabout $1,100$800–$2,000
Other specialty tradesabout $1,100$550–$1,500
Concrete & masonryabout $700$650–$1,100
Electricalabout $500$500–$600
How we count

Annual general liability premium before taxes and fees, on policies Soma placed that started between Nov 19, 2025 and Nov 19, 2026. The middle range is where half of them fall. Small groups aren’t shown, and every figure is rounded.

Contractor insurance cost across the USContractor insurance cost in FloridaContractor insurance cost in CaliforniaContractor insurance cost in New York

What moves the price

From the same policies.

Your trade
about $500
Electrical
about $1,900
Roofing
Your revenue
about $1,100
$100K–$500K
about $1,900
$500K+

Common questions

Price

How much does contractor insurance cost in Texas?
With Soma, Texas contractors pay about $1,200 a year for general liability, based on policies placed in the last 12 months. Half pay between about $650 and $1,900. Trade matters most: about $500 for electrical, about $1,900 for roofing. We shop many insurers in one go to find you a lower price.
How does contractor insurance in Texas compare with other states?
With Soma, Texas contractors pay about $1,200 a year for general liability. Across all states, the typical one pays about $1,000.
How much does general liability insurance cost for a roofer in Texas?
With Soma, roofers in Texas pay about $1,900 a year for general liability. Half pay between about $1,600 and $2,600.
How much does general liability insurance cost for a general contractor or remodeler in Texas?
With Soma, general contractors and remodelers in Texas pay about $1,200 a year for general liability. Half pay between about $700 and $1,900.
How much does general liability insurance cost for a plumbing or HVAC contractor in Texas?
With Soma, plumbing and HVAC contractors in Texas pay about $1,100 a year for general liability. Half pay between about $800 and $2,000.
How much does general liability insurance cost for a concrete or masonry contractor in Texas?
With Soma, concrete and masonry contractors in Texas pay about $700 a year for general liability. Half pay between about $650 and $1,100.
How much does general liability insurance cost for an electrician in Texas?
With Soma, electricians in Texas pay about $500 a year for general liability. Half pay between about $500 and $600.
Does my trade change the price?
Yes. Electrical contractors pay about $500 a year with Soma, and roofing contractors pay about $1,900. Insurers price the work itself: work at height, structural work and work that can cause water or fire damage usually cost more.
Does my revenue change the price?
Yes. Contractors with $100K–$500K in revenue pay about $1,100 a year with Soma, and those with $500K+ pay about $1,900. Insurers price general liability on how big your business is, in revenue or payroll, so a bigger business usually pays more.
What makes contractor insurance cost more?
Your trade first, since some work carries more risk than other work. Then your revenue or payroll, past claims, higher limits, work you hand to uninsured subcontractors, and the kind of jobs you take on (new homes, work at height). Where you work matters too, since prices differ from state to state.
How can I lower my contractor insurance cost?
Shop it: the same business can get very different prices from different insurers. We shop many insurers in one go to find you a lower price. Beyond that, make sure you’re classed for the work you really do, collect a certificate of insurance from every subcontractor, keep a clean claims record, and pay in full if your insurer charges for installments.
Does hiring subcontractors change my price?
It can. Insurers expect your subcontractors to carry their own general liability and to name you as additional insured. If a sub has no insurance, many insurers charge you for that sub’s work at your year-end audit, as if they were your own crew. Collect a certificate from every sub before they start.
What is a premium audit?
Many contractor policies are priced on an estimate of your revenue or payroll for the year. When the year ends, the insurer checks the real figures: if they came in higher, you owe more; if lower, you may get money back. An honest estimate up front avoids a surprise bill.
Why might my quote differ from the price on this page?
The figures here are typical prices, not a quote. Half of contractors pay between about $650 and $1,900, and yours depends on your trade, size, state, limits, claims history and the work you take on. You answer a few questions; we handle the forms. Then we show you real prices from many insurers.
Do these prices include taxes and fees?
No. They are the annual general liability premium before taxes and fees. Some states and insurers add surplus lines taxes or a policy fee on top, and your quote shows them.
Can I pay monthly?
Often, yes. Many insurers let you pay monthly or quarterly, and some charge a small fee for it, so paying in full can cost less. Ask us and we lay out the options on each quote.

Coverage

What does contractor general liability insurance cover?
Claims that your work hurt someone or damaged their property: a client trips over your tools, a ladder falls on a car, or a pipe you fitted leaks after the job is done (completed operations). It pays for your legal defense too, and covers personal and advertising injury, such as a claim that you libeled a competitor.
What isn’t covered by contractor general liability?
The cost to redo your own faulty work (it covers the damage your work causes, not the work itself), injuries to your own employees (workers’ comp), your tools and equipment, your vehicles (commercial auto), and professional design advice. Many policies also exclude or limit certain work, such as roofing, new home building or work above a set height, so check that your quote names the work you do. Ask us and we walk you through what a quote leaves out.
Are my tools and equipment covered?
Not by general liability. Tools and equipment cover (often called inland marine) protects your tools and gear on job sites and in transit. It’s a separate policy or an add-on; ask for it alongside your general liability.
Do I need commercial auto insurance?
If you use a vehicle for work, yes: general liability excludes vehicles, and personal auto policies often exclude business use. If staff drive their own cars for work, hired and non-owned auto cover protects your business.
What’s the difference between occurrence and claims-made policies?
An occurrence policy covers anything that happened while it was active, even if the claim comes years later. A claims-made policy covers claims made while it’s active, so if you switch or cancel, you may need tail cover for claims that come in later. Occurrence is simpler to keep track of; claims-made can cost less at first. Your quote says which kind it is.

Requirements

What insurance does a Texas contractor need?
Clients and general contractors often ask for general liability. Workers’ comp is optional for most private employers in Texas (Texas Labor Code §406.002). Electricians and air conditioning and refrigeration contractors need a license from the Texas Department of Licensing and Regulation (TDLR), and plumbers one from the Texas State Board of Plumbing Examiners (TSBPE).
Which contractors need a state license in Texas?
Electricians and air conditioning and refrigeration contractors are licensed by the Texas Department of Licensing and Regulation (TDLR), and plumbers by the Texas State Board of Plumbing Examiners (TSBPE). Cities can add their own registration and permit rules, so check where you work.
Is a contractor license bond the same as insurance?
No. A license bond protects your clients and the public: if the surety pays a claim against you, you pay it back. General liability protects you. Many state and local licensing boards ask for one or both.
What is a certificate of insurance (COI)?
A one-page proof of your coverage: your limits and policy dates. General contractors, property managers and clients ask for one before you start. Once your policy is in place, ask us and we send it, naming whoever needs to be on it.
What does ‘additional insured’ mean?
It extends your policy to protect someone else, usually the general contractor, client or property owner, against claims from your work. Many contracts require it. It’s added to your policy by endorsement, sometimes for a fee.
What are ‘waiver of subrogation’ and ‘primary and non-contributory’?
Two contract terms general contractors often ask for. A waiver of subrogation stops your insurer from suing them to recover a claim it paid. Primary and non-contributory means your policy pays first, without asking theirs to share. Both are added by endorsement.
What insurance do subcontractors need?
Whatever the contract says. Commonly: general liability at $1M per occurrence and $2M aggregate, workers’ comp if they have employees, and the general contractor named as additional insured on a certificate.

Getting covered

How fast can I get covered?
Usually the same day. Most Soma customers have coverage that starts the day they first reach us. You answer a few questions; we handle the forms.
What do I need to get a contractor insurance quote?
Your business name and address, the work you do, your annual revenue and payroll, how long you have been in business, how much you hand to subcontractors, your license number if you have one, and your past insurance and claims. You answer a few questions; we handle the forms. We shop many insurers in one go to find you a lower price.
Can I get contractor insurance with past claims or a gap in coverage?
Usually, yes. Insurers look at what happened and what changed since, and some write businesses with past claims or a lapse, at a price. Tell us up front: we shop many insurers in one go to find you a lower price.
Can a new contracting business get insured?
Yes. Without a claims history, insurers lean on your experience in the trade and the work you plan to do. You answer a few questions; we handle the forms.
Can I switch to Soma if I already have a policy?
Yes. We can start your new policy the day the old one ends, or sooner if the price is right. If you cancel early, most insurers refund the unused part, though some keep a share. Ask us to check before you switch.
Why get contractor insurance through Soma?
Soma is a licensed insurance broker built to get you to a lower price quickly, with little work on your side. You answer a few questions; we handle the forms. We shop many insurers in one go to find you a lower price. Real, licensed experts walk you through each option, and you choose.

See your price today.

A real person calls you back.

Updated · © 2026 Soma Insurance Services